Removing Rubio Monocoat, a hardwax oil finish used for wood surfaces, can be a bit challenging because it bonds strongly to the wood fibers. If you need to remove it for refinishing or repair purposes, here are the steps you can follow:
Materials you will need:
Rubio Monocoat Remover: Rubio Monocoat offers a specialized remover for their product, which is recommended for safe and effective removal.
Protective gear: Wear gloves and safety glasses to protect your skin and eyes.
Plastic wrap or plastic sheeting
Paintbrush or foam applicator
Plastic scraper or putty knife
Clean cloth
Mineral spirits (optional)
Steps:
Safety precautions: Ensure you are working in a well-ventilated area or outdoors, as some fumes may be produced during the removal process. Wear gloves and safety glasses to protect yourself.
Prepare the area: Lay down plastic wrap or plastic sheeting to protect the surrounding area from any drips or spills.
Apply Rubio Monocoat Remover:
a. Shake or stir the Rubio Monocoat Remover well to ensure it's properly mixed. b. Use a paintbrush or foam applicator to apply a thick, even layer of the remover onto the Rubio Monocoat finish you want to remove. Ensure complete coverage.
Allow dwell time: Follow the manufacturer's instructions for the recommended dwell time. Typically, it's around 20-30 minutes, but it can vary. During this time, the remover will break down the finish.
Scrape off the finish: After the dwell time has passed, use a plastic scraper or putty knife to gently scrape off the softened Rubio Monocoat finish. Be cautious not to gouge or damage the wood underneath.
Wipe clean: Use a clean cloth to wipe away the removed finish and any residue. Ensure the surface is clean and free from the Rubio Monocoat.
Inspect and repeat (if necessary): Check the wood surface to see if all the finish has been removed. If any areas still have residue, you may need to repeat the process.
Clean with mineral spirits (optional): If there is any stubborn residue remaining, you can try using mineral spirits on a clean cloth to remove it. Make sure to follow proper safety precautions when using mineral spirits, and test a small, inconspicuous area first to ensure it doesn't harm the wood.
Sand and refinish (if needed): Once you have successfully removed the Rubio Monocoat finish, you may need to sand the wood surface lightly to prepare it for refinishing with a new coat of Rubio Monocoat or another wood finish of your choice. Follow the manufacturer's recommendations for application and drying times.
Always follow the specific instructions provided by the manufacturer of the Rubio Monocoat Remover you are using, as products and techniques may vary. Additionally, take precautions to ensure your safety and protect the surrounding environment during the removal process.
Comments
Post a Comment